Installing and Configuring the 804 Mesh is as Simple as 1, 2, 3 ...
Connect the 804Mesh satellite unit to a power source. Wait approximately 60 seconds until the three lights on top light up green.
Press the button labeled, WPS, on the bottom of the GigaCenter. Hold for five seconds. Light will turn amber.
Then, within two minutes, press the button labeled, WPS, on the back of the 804Mesh satellite unit.
To assist with the ideal location of the 804Mesh satellite,
a series of four indicator lights, labeled Wi-Fi Backhaul
can be found along the top of the unit.
If the indicators have three green lights and one red light then the 804Mesh is too close to the GigaCenter and should be moved further away.
If just one light is green, then the 804Mesh is too far from the GigaCenter and a new location should be found.
If two lights are green, then the distance between the 804Mesh and the GigaCenter will produce adequate results.
If three or four of the lights are green with no red light, then the distance between the 804Mesh and the GigaCenter is optimal.
Watch the 804Mesh Set-Up video here